B20 VTEC in a DA

[DaTeg182]

Hey ClubIntegra I was hoping someone give me some info on putting a b20 VTEC in a DA such as wiring, and other tips that someone who has built this motor might have/problems you ran into.

I'm using a B20Z2 block and a B18C1 head for an NA build.

Thanks

 

[BrokenTalon27]

What year DA?

 

[DaTeg182]

What year DA?

1991, that probably would have been good information.

 

[BrokenTalon27]

You'll need to get an OBD0-OBD1 jumper harness, an OBD1 ECU, and an OBD1 distributor.
The ECU will need to be socketed and chipped. You will need a p28, p06, p30, or p72 OBD1 ECU.


*Note- If you are running the stock GSR intake manifold, you will need a p72 ECU if you want to secondary butterflies to operate.

You can search LS/Vtec and B20Vtec on here and find complete how to write ups as well.

 

[DaTeg182]

Thanks. Yeah I have writeups for the actual motor build, I just needed some specifics on putting it in a DA.