Anyone want to finish my body work?

[Chi-Town-DC4]

So I started doing the body work on my car and I got as far as I could I need someone to help me out finishing the bondo like getting everything smooth and ready for paint

I have another thread with pics of the car I'll find and post on here so you all can see basically what i need done

 

[JGvtec]

I could come by and help. Depends where you are at. If you just need a hand. Just tell me what to do i can help

 

[Chi-Town-DC4]

I live in the western suburbs
Here's the link to my other thread with pics iv had some body guys look at it and they told me bondo isn't the best way to do what I wanna do but what I'm doing is temporary I just what it looking good enough let me know what you think

 

[Chi-Town-DC4]

I live in the western suburbs
Here's the link to my other thread with pics iv had some body guys look at it and they told me bondo isn't the best way to do what I wanna do but what I'm doing is temporary I just what it looking good enough let me know what you think

 

[Prozon]

What exactly are you doing with bondo? Don't cover up rust with it. You can only really use a thin layer of bondo and you have to have it prepped right or it will crack and fall off.

 

[DWATTS5250]

Grind out or cut out all the rust. Like Prozon said, you dont wanna put bondo or body filler over the rust, you'll just end up doing twice as much work later. (And it WILL always happen when you least expect it...or need it to....Import Tuner mag photog shows up....and there's your ride in the background with the nasty rust bondo) gack!


lol

 

[Chi-Town-DC4]

http://www.clubintegra.com/board/showthread.php?p=879815#post879815

Here's the link I ment to post.. right now I'm just doing temporary work till I can put some real quarter patches in and do it right.. Like i said I had some body guys look at it and i know now I did it wrong but its all good I think I'm just gonna finish what I started and paint it myself and see how it turns out and later have a pro do it

 

[Chi-Town-DC4]

http://www.clubintegra.com/board/showthread.php?p=879815#post879815

Here's the link I ment to post.. right now I'm just doing temporary work till I can put some real quarter patches in and do it right.. Like i said I had some body guys look at it and i know now I did it wrong but its all good I think I'm just gonna finish what I started and paint it myself and see how it turns out and later have a pro do it

 

[G3GirL]

If you don't get rid of the rust and treat the metal, your "temporary" work will end up costing you a lot of money to do over. It's going to be a mess underneath and it will spread, guaranteed. Plus you're wasting money on material and supplies.

 

[Chi-Town-DC4]

Like my other thread showed I did cut the rust out and weld clean metal in the rust isn't a problem anymore its the body lines I want to get everything straight my buddy just stopped by n were gonna try to work on it either this or next weekend i guess well have to see what happens

 

[Prozon]

If only you were in Washington. I'd jump on the chance to help with some body work haha.