Any easy wires to tuck / Not needed wires?

[Da90Teg]

Comming from the trottle body Ive got 2 wires that arent plugged into anything and have marrets on them (Previous owner)

I have an after market short ram (no name, Previous owner)

Can I try and remove these wires or will it cause a vaccum leak?

Not sure how much air the marrets actually keep out anyways

Other then this, Are there any wires I can tuck or move to clean up the look of my engine bay?

 

[tilegend]

do you have a picture?

i assume you mean the vacuum hose has some kind of cap on it...

as far as cleaning up the engine bay some people remove the emissions related sensors and solenoids / charcoal canister / you can remove cruise control if you have that / there's many other things it depends on how far you want to go with it.

 

[Da90Teg]

Ill try and get a picture today, And im willing to go as far as I can without pulling the motor.

ps: I dont know what I was thinking when I made the first post. They arent wires, there tubes / hoses.

 

[tilegend]

you can tuck the chassis wire harness without removing the engine...

the passenger side is the easier part... to get to the wire harness on the driver side you're most likely going to have to remove the dashboard but that is if you're confident enough to do a wire tuck

here's some more information:
http://forums.g2ic.com/showthread.php?185951-The-DA-wire-tuck-write-up

 

[9512712930]

i wanna know if i could get some help in a wire tuck.. can anyone help...

 

[Da90Teg]

thank you tilelegend!