ABS tuck, will this work??

[soto2635]

im in the process of tucking my engine bay, im doing the abs right now and im wondering can i use stainless steel lines rather than hardlines for the breaklines the reason im thinking of going this route is b/c it would be much easier to do i think insteed of having to bend and all that with hard lines. any thoughts??

 

[Integraguy04]

yea you can use SS lines...just going to warn you...redoing brakes lines is no easy project

 

[soto2635]

oh i know lol so it would work with out n/p ???

 

[tkvang]

Yeah you'll be fine. I had that setup in another car. You'll be fine. I drove over 50k+ miles no prob.

 

[soto2635]

cool u use the same fittings that u would u use with hardlines right??

 

[DailyDB8]

anyone got any pics? this sounds interesting, im getting ideas too :thumbup:

 

[Ominous G2]

Ive been told to use regular steel lines, and steel fittings. Do not use aluminum fittings, mixing aluminum and steel will cause corrosion. Also make sure your flare tool is a 37 degree. You will also need 3/16" tubing. Stock honda threads are 10x1.00mm, and your AN fittings will be -3. I advise not to cheap out on this project.