a few simple questions...

[sciullo779]

ok so im getting a turbo kit good for up to 450hp, whats the max pressure stock internals can take, and what psi would you recommend,

second, lets say i get my kit installed i get a basic tune so my engine doesnt blow apart and i dont run lean, will my clutch take any boost at all or will it start slipping the second it sees any power greater then stock

 

[dc2GS-R]

Do you have a GSR or LS? Generally I wouldn't run more than 10 psi on an internally stock B series. I would make sure you have a really good tune to run that much consistently.

Stock Integra clutches are notoriously weak. It will need to be changed soon.

 

[Spody02]

see what your tuner thinks is healthy for your motor, get a good tune and no way your clutch will stand up to that

 

[sciullo779]

sorry lol i have an ls and i just wanted a temp tune at a much lower pressure till i could get a new clutch but according to dc2-GSR that wont happen i should prolly get the clutch done just before i get the kit installed, i was looking at act the heavy duty pressure plate with the performance street disc and to maybe just get my flywheel resurfaced