96 integra gsr

integricerocket

New Member
Whats up everyone im new to the site and so i figured i would post up what i have ... I have a 96 integra gsr with 43k miles on it. I bought it bone sotck for 11 grand with 25 k miles on it, since then i have done a few mods here and there such as, aem cold air intake, dc sports 4-2-1 1 piece headers, thermal r&d cat back exhaust, drop zone coilovers, apc pedals, b&m short shifter, momo shift knob, two sets of clear corner lights one black one chrome, had some aftermarket "carbon fiber" tailights on which are now for sale but the stock tails are on right now, for future mods i plan on starting my engine and head build this winter starting with the head with valves, valve retainers, valve springs, port and polish the head, 5 angle valve job and crower stage 2 cams. then i will do the rest later. if you want to see the car you can go here http://www.xicc.net/modules.php?op=modload&name=PNphpBB2&file=viewtopic&t=776&sid=7c7c1c78d773d6a7ba3e501ecd6f56ee
I am apart of a local car club that is always open to sponsors so feel free to explore our site and ask questions thanks. If you have any questions email me at integricerocket@aol.com and ill have them answered for you.
 

cabezzzdb8

BBS wanted
Welcome to CI, teg looking good liking the paint color looked like in the first picture the car was blue but then the other it was green.
 

g3teg97

Super Moderator
That's a clean GSR. I'd suggest getting the GSR blades, but that's just me. Welcome to CI, but the way.
 

reconxtru

DC5!
do you still have those Acura Starfish GSR Rims? if you do you should take off the center caps. IMO, it looks better.

o yea WELCOME TO C-I
 

newspeed

New Member
how did the i/h/e help the car? im looking into those myself
 


integricerocket

New Member
yea

as for my rims i like them but im still lookin for a set of after market...possibly gram lights or something bronze ive seen them around this site and i happen to like the look...the intake headers and exhaust made significant increase in horse power but nothing special ...its not all what it cracks up that the distributors say they will add, but it definatly helps throttle response a lil bit and a fair share on mid to upper range power so yea i would invest in them
 

TegSox

Super Duper Moderator
Wow, that's some seriously low mileage for a '96. Good luck with the head work, you gonna do pistons too?
 

integricerocket

New Member
yep

i will do the bottom end next winter and with that im not sure what size or bore or anything about that i just dont know what i want to do i know i need to lower the compression becuase i do want to make it a turbo application car but im not sure on what all i have to get but i will keep you guys posted on whats happening with the ride whenever stuff is being done to it .
 
You must log in or register to reply here.
Top