93 ls turbo head gasket

[snarejdv01]

I just replaced my head gasket and now it wont start. I have searched forum after forum and cant figure out why. I have reset my cam timeing. Tdc on the compression stroke. Cams are aligned right dizzy at no1 getting fuel and spark compession is a little low at 150 across the board. I have been banging my head against a wall for a week now trying to fig it out. I cranks fine and sounds like it wants to start but just wont catch any suggestion is appriciated thanks

 

[thenoxus1]

Double check your timing at cams/crank/dizzy

 

[jgreene1234]

I agree crank timing?

 

[snarejdv01]

The crank is at tdc on the compression stroke. Its right on the little mark on the pulley

 

[DaddyBuiltRacing]

TPS and Map sensor are hooked up backwards, swap the plugs around and see if she fires up

 

[snarejdv01]

Thats what it was. They werent hooked up back wards but my map sensor plug had fallen out. Plugged it back in and fired right up. Thank you your a life saver

 

[DaddyBuiltRacing]

No problem!