92 integra automatic idle problem

[92DAteggy]

So my 92 integra is an automatic b18a1 and I have replaced the TPS sensor and my idle still bounces a bit, also I adjusted the idle to idle at 900rpm but when I put it in drive it drops down and idles really low and vibrates my whole car! Sometimes it sticks at 1500 untill I pull the gas peddle up! Someone please help I'm trying to fix these problems before I start building and do a 5spd swap

 

[djzachtyler]

well if it is sticking and requiring you to pull up on the gas pedal, you may want to look at your throttle cable & replace that.

these cars should ave the idle set at 700-750 RPM

also may want to clean out the IACV on the back of the intakemanifold... that could be the main culprit behind your bouncy RPMs