b18a1muas New Member Nov 2, 2008 #1 Obdo to Obd1 wire harness does not go by color code. Can any one help me figure this conversion out. I have cutted the LS distributor connector to the b16 connector trying to get the correct conversion.
Obdo to Obd1 wire harness does not go by color code. Can any one help me figure this conversion out. I have cutted the LS distributor connector to the b16 connector trying to get the correct conversion.
BrokenTalon27 W.F.O Nov 2, 2008 #2 Get an ECU jumper from Boomslang Fabrication. Included with the harness is a color match list. Thats how we did mine. And on the dizzy, all the wires match up color except two, both have notation in the packet on what to connect them to. Last edited: Nov 2, 2008
Get an ECU jumper from Boomslang Fabrication. Included with the harness is a color match list. Thats how we did mine. And on the dizzy, all the wires match up color except two, both have notation in the packet on what to connect them to.
