91 da9 suspension interchangeability

eLeCtro

New Member
hey ..

i have a '91 integra DA9 (B18A1) and i just wanted to ask something .. does the suspension (shock absorbers and springs) from any other honda fit to mine?

the brakes for example are the same as on the civic VTi (EG6 - B16A2)

i'm from austria and i have the only one integra in this country .. there are only a few over all europe so its very hard to find any parts ..

thx
 

DumaDa9

New Member
older honda accords, honda civic ef and crx are a direct bolt on. Newer civics and integras will fit if you swap out the front fork assembly
 

eLeCtro

New Member
so the suspension from the crx would fit plug&play .. is there any difference between the vtec and non-vtec parts?
 

DumaDa9

New Member
not for suspension, unless you're talking about type r, then yes
 


eLeCtro

New Member
suspension

if anybody says that the original suspension from the CRX vtec fits to mine i would buy it from a friend immediatly .. but i need to be sure about it..
 
Last edited:

735e32

Im MEL.
Go to g2ic and search "hybrid suspension" it has like every suspension question you can think of.
 


eLeCtro

New Member
Here's what you will need to use EG/DC shocks:

-EG/DC shocks
-EG/DC front forks
Click to expand...
i think i'll take this conversion with the EG-shocks .. as far as i understand this text i can use in the rear the shocks and springs from the EG without modifying anything else?

in the front i need the shocks, springs and front forks ...
 

eLeCtro

New Member
if it would be that easy i surely would buy coilovers .. but the police here kicks ur ass if they find anything that isnt for your car
 

Antx

New Member
really ? that's crazy.. good that they don't touch anything here..

Just the noise is the problem if any, that's all :)
 

Rich-PMS

New Member
I know of you use 3rd gen integra rear struts/springs they are 2" shorter.

I'm most likely getting coilovers from a gen3
 
You must log in or register to reply here.
Top