90 LS E Brake light staying on

J@meson

New Member
First off is your ebrake pulled? Second its probally switch failure on the Ebrake handle, sometimes they get gummed up and stick which is why they wont turn on but in your case may have poped off the clip it sits in.
 
As Noxus stated above, check the brake fluid. The fluid may be low due to a leak or you're pads being worn down so far that it causes the floater in the MC to drop down far enough that it sets the light off. If you haven't had a brake flush in the past 3 years, I recommend one.
 


Top