ManualDriveChik
New Member
Okay, so here's my problem. Went to the East Coast Honda Meet, and on the way back, my motor blew. So, I made the command decision that if I have to put a new motor in, I wanted to do a B18C1 swap. I'm buying the motor on the 20th, and I'm tryin to order everything I need to do the swap before I get the motor so I can get this swap done quick and have the car ready by the time I leave for Honda Day Englishtown on August 10th. The motor I'm gettin has:
ITR cams
Bisimoto cam gears
Blox Intake Manifold
ITR Throttle Body
AEM fuel rail
GSR & CRT Pully
New VTEC solenod gasket
New OEM Timing belt
New Water Pump
I am aware that the new motor is OBD1, and my car is OBD0. That being said, I have a parts car that's a 1993, which is OBD1, so what parts can I use from my parts car for this swap, and what will I have to/ should I order? I already ordered new Energy Suspension motor/trans mounts. Thanks in advance for everyone's input.
:lol:
ITR cams
Bisimoto cam gears
Blox Intake Manifold
ITR Throttle Body
AEM fuel rail
GSR & CRT Pully
New VTEC solenod gasket
New OEM Timing belt
New Water Pump
I am aware that the new motor is OBD1, and my car is OBD0. That being said, I have a parts car that's a 1993, which is OBD1, so what parts can I use from my parts car for this swap, and what will I have to/ should I order? I already ordered new Energy Suspension motor/trans mounts. Thanks in advance for everyone's input.
:lol: