16x8 0 offest on my 92 acura integra

iblackness

New Member
Hey guys, this is my car... i have lowered it a couple inches and i want to get some rims now. I was thinking of going with some sportmaxx 522 16x8 0offset. will those fit in my car. fenders have already been rolled and i was planning on stretching the tires a little, that way it would rub on the fenders,. let me know what options i could have and what are the best ways. i want that tilted wheel look on my car. negative camber.

http://www.ebay.com/itm/16-8-16x8-XXR-522-Gold-Concave-Rims-Wheels-Stance-4x100-90-95-00-05-Mazda-Miata-/220942576185?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item3371342a39#ht_3855wt_1270
 

SMACKABEEZY

F0E D0E M0 H0ES
following the hellaflush fad? i say dont do it. i did it once and made my car ride like s***. but you might want to get front and rear camber kit agjust them to your liking and prepare for a s***ty handling and save up for new tires every 2 months
 

99tegjawn

New Member
Negative camber is cool if your really really really really rollin with deep pockets. Although camber doesn't hurt tires that much if your toe is in spec


Sent from my iPhone using Tapatalk
 

endo617

Rattle Can Technician
yup going to have to roll fenders and get a camber kit to go negative, and my SmackB said get ready for some sh!tty handling
 


DC2MAN1119

New Member
If its done right handling is fine. Honda suspensions are amazing. I would advise against camber kit because factory ones will have more clearance and your wheels will naturally camber when you slam so don't worry. As long as you have a good set of coilovers or gc/konis and your alignments hood it should be fine.

My dc2 is like half inch from the ground n it handles great. I have a lot of time and money into it though.

Sent from my M9300 using Tapatalk
 

iblackness

New Member
my car is currently lowered on yellow koni and ground control coilovers. its a pretty good ride right now and the picture in there was before the car was lowered evenly so now everything is adjusted the same way. what are some other options i could do for my car? i really like the negative camber/flushed way.
 

endo617

Rattle Can Technician
16x8 0 offset, your stock camber isn't going to be enough i had the same profile rim with 205/40/16 and the were fine in the front but the real was popping out that it was cutting into the tire, and this was on a DC, that i think has more clearence
 


iblackness

New Member
but ive heard the more i drop it. the less of a problem its gonna be for tires because it will tilt and tires wont rub as much. i was just wondering if 16x8 0 offset will fit in my car.
 

endo617

Rattle Can Technician
iblackness said:
but ive heard the more i drop it. the less of a problem its gonna be for tires because it will tilt and tires wont rub as much. i was just wondering if 16x8 0 offset will fit in my car.
Click to expand...
False, and yes they were fit but you need to make them work by getting the right parts

that my old DC4, no camber kit, just Tein Basics, you can see how the rear pops out too much, i need negative camber to get it right



the front was good enought

 
Last edited:

DC2MAN1119

New Member
endo617 said:
False, and yes they were fit but you need to make them work by getting the right parts

that my old DC4, no camber kit, just Tein Basics, you can see how the rear pops out too much, i need negative camber to get it right



the front was good enought

Click to expand...
Sry bro but fail. Need to be way lower actually strech a tire n roll/pull fenders as needed. Sry.

Sent from my M9300 using Tapatalk
 

Aussie

Zoom-Zoom
You can just space the trailing arms with washers for negative camber on the DA. Just for the rear of course.
 

iblackness

New Member
yeah my car is like 1 in from the ground... i think thats low enough.. muffler is about 1/2in and i might be holding up a little higher. so the sportmaxx 522 16x8 0 offset will fit with no problem, i will post a picture of my car soon on how it looks . fenders have been rolled all the way. let me know if i will still need a camber kit or not. thank you guys ... all the comments and pictures on how my car will look are greatly appreciated. if anyone has the xxr 522 16x8 0offset on a integra my year please let me know. i would like to see some pics
thanks again
 
You must log in or register to reply here.
Top