i hope this isnt a newbie question.but is it hard or do you have to do any fabrication to put 05 rsx-s seats in a 95 integra.im about to buy my firend rsx-s seats and put them in my teg
I believe you need the RSX seat rails, then I think you can just mount them where the old rails were mounted. If not I would guess you would need to drill new holes.
someone did a write up on it somewhere, i forget, but if u use the dc5 seat rails, u have to drill two new holes from my understanding. every other hole lined up. check HT or clubrsx
had a buddy who did this. you have to drill...kinda sucks if you ask me. i think it was four holes total, at least that's how many he had to do for both seats.
