My 94 Sedan Build-Up - Lots of Pics = ) [ Updated Constantly... So Stay TUNED!!! ]

konerri

New Member
when i was stilling rocky a stock front end, i was going to get a drivers side j's racing replica air sucker to feed into a chamber where i will mount my intake. but i guest that idea is plan B now too.
 

DailyDB8

>>>Honda Enthusiast<<<
konerri said:
when i was stilling rocky a stock front end, i was going to get a drivers side j's racing replica air sucker to feed into a chamber where i will mount my intake. but i guest that idea is plan B now too.
Click to expand...
dude is swear you're like my brother from another mother. i want the left side too... but in this case it'll be for the brake duct cooling for both sides... and a spare set of headlights and a duct for the right since i have a b series... lol

btw know anyone that makes the left j's air duct?
 


Last edited:

konerri

New Member
DailyDB8 said:
dude is swear you're like my brother from another mother. i want the left side too... but in this case it'll be for the brake duct cooling for both sides... and a spare set of headlights and a duct for the right since i have a b series... lol

btw know anyone that makes the left j's air duct?
Click to expand...


PasswordJDM makes a replica for the driver's side. But i've only seen pictures of it and it wasn't on the car. Still might pick one up because i might rock a stock front later.
 

DailyDB8

>>>Honda Enthusiast<<<
konerri said:
PasswordJDM makes a replica for the driver's side. But i've only seen pictures of it and it wasn't on the car. Still might pick one up because i might rock a stock front later.
Click to expand...
password jdm makes a LHD side however its a different design than the J's Racing. i emailed them asking if they made a replica of the j's racing on the left side since they carry copies of the right side, already mentioned i didn't want the pwjdm style ones(even included the part no.)... still sent me the link to the pwjdm style ones. :thumbdown

the guy that did make them was from another country... and he scammed a buncha folks before he retired. SiFu on H-T. lucky i got mines right before he did but it was for the right side, never bother to thought about the left side at that time. For something hand laid , it was good quality stuff. dude had skills, i wish i took more pics of it before i sold it and got the c/f replica. Even tho his was fiberglass, it was nice a thick, fitment was good too.
 

DailyDB8

>>>Honda Enthusiast<<<
konerri said:
gotta stop teasin' bro just tell us already.
Click to expand...
hahaha, ok ok. going forward i'll cut down on the teasing pictures with the phone. can't promise that on my nikon tho :p

endo617 said:
is it a mugen steering wheel?
Click to expand...
lol, what was the give away?

newest purchase, a non-teaser shot. comparison of the APEXi WS2 (top) vs. Mugen Twin-Loop (bottom) - APEXi WS2 is FOR SALE


for all you sedan owners, if you didn't know... 92-95 Civic Coupe or Sedan has the same length as the 94-01Integra Sedan. Bolt-on however is a different story because of the length of the aftermarket b-pipe vs OE. Bottom line, a complete cat-back should work on an integra sedan.
 

jbrown97ls

Active Member
DailyDB8 said:
for all you sedan owners, if you didn't know... 92-95 Civic Coupe or Sedan has the same length as the 94-01Integra Sedan. Bolt-on however is a different story because of the length of the aftermarket b-pipe vs OE. Bottom line, a complete cat-back should work on an integra sedan.
Click to expand...
Good to know, Thanks!
 

DailyDB8

>>>Honda Enthusiast<<<
j's wide fender w/ 17x7 +35 RSZ-Rs + some nice wide tires should be muy bueno. :thumbup:



still wasn't able to clear my 17x9 tho :( , but its okay, hopefully i can get my hands on a set of J's Fender Flares 8)
 
You must log in or register to reply here.
Top