Super Sexy Slammed: Helpful Hints/Tips

[bradster101]

So I can leave the liner and it will self clearance? And how did you guys go about bending that fold down???

 

[Samurai_Blue]

hammer

 

[ixcocoyxi]

well, i took my liner off, and then hammered it.

 

[bradster101]

yea thats what I was thinking... Also, do you think I should get stiffer springs? Right now I have 10 front 8 rear but every now and then I hit the bump stop on the front. Would stiffer springs help that issue?

 

[Kinta94]

get something with adjustable dampening and that would solve your issue

 

[bradster101]

fixed liner but yea prolly do that...

 

[ixcocoyxi]

springs wont really do anything. its the dampener that determines the stiffness. yeah it will help to get stiffer springs but not much.

 

[DOLCECULLO]

has anyone slammed on the skunk2 pro-s II"s? I'm currently saving for a set of coilovers and those are the ones that I have my eye on.

 

[NeroCB7]

how do you get the wheel liners off im trying to get more slammed

 

[Girlsdoitbetter]

so i have ebay springs on my stock struts & my car is LOW, but the ride sucks. lol. Considering that this can't be good for my car, i'm planning on getting APEXi n1 exv coilovers in the next few weeks. Will new coils effect the camber & the way my wheels sit? Like do you know if I would have to get anything extra?

 

[ryanDC]

a camber kit if you care for the negative camber but if you dont care than its not necessary
edit: as you go lower, your wheels will camber in

 

[b20vtec MFer]

I'm in the process of ordering koni yellow/GC and i plan on slamming my car when i get them. However, i can't find fucking GC extended top hats anywhere except used ones!! It's like they disappeared off the internet or something..Any help??

 

[j13]

i tried the hack saw method, it was a PITA, i ended up slamming the rear and rolling with a floor Jack bar. no more> rubbing

 

[fernando_dc2]

coy! my car keep getting camber rash AFTER i installed my camber kit and aligned it....what can i do to stop it? use another camber kit? any recommended? im using KYB AGX with coilover sleeves.... rides good but camber rash still happening and im scared i will eventually be stuck with a flat!! help please

 

[ixcocoyxi]

coy! my car keep getting camber rash AFTER i installed my camber kit and aligned it....what can i do to stop it? use another camber kit? any recommended? im using KYB AGX with coilover sleeves.... rides good but camber rash still happening and im scared i will eventually be stuck with a flat!! help please

what kind of camber kit do you have?

plus, its the toe that determines most of the 'inside' tire wear.