Samurai Blue's Integra Build

[speedin]

Before and after are the same. Maybe Dylan just doesnt have adjustable upper control arms?

Ahhh good catch I didnt even look at the before. That plus I forgot tegs didnt have adjustable camber from the factory

 

[JDMxDB8]

You need to get some camber kits broski. Dialing in some camber settings is fun.

 

[Samurai_Blue]

nope the skunk2 ones cost too damn much too

 

[Samurai_Blue]

You need to get some camber kits broski. Dialing in some camber settings is fun.

im gonna get that and new ball joints...i kind of want to do my motor and finnish up my suspension at the same time. i think i might get some before i go to thunder hill in october

 

[mirrorimg]

correct! im saving to get the skunk2 pro+ ones...but i always want to buy something before i actually save for them

I guess those are the ones with the balljoint screws on the underside?

I replace my omni ball joints with skunk2 ones when they went bad. Maybe you can mix/match for a cheaper price. Not sure though, the balljoints alone were super expensive.

 

[Samurai_Blue]

i think those are the ones with the stronger ball joint and a shorter camber plate

 

[Zero Fighter]

Looking good man ....keep it up yO!!!

 

[wite2nr]

hey look who finally got some new rubbers, ready to tear up the circuit now huh dylan!

 

[Samurai_Blue]

Looking good man ....keep it up yO!!!

Thanks man

 

[Samurai_Blue]

hey look who finally got some new rubbers, ready to tear up the circuit now huh dylan!

tighten up and do a track day with us Im trying to get Rogers bro vi to come

 

[HawaiiImport]

what a beauty of an autox car. love those gold rims!!!!

 

[HawaiiImport]

:roll: nothing really new

DANG I need those longer bolts that connect the benen tie bar to the ASR subframe brace. Ive had the gold benen tie bar sitting around for like a year bc I have yet to take those bolts off and figure out what size I need. any idea???

 

[Samurai_Blue]

what a beauty of an autox car. love those gold rims!!!!

its built more for a time attack car actually or as it is right now a NASA H2 car, but it will become a time attack car in the future for Redline Time Attack and im trying to source a shell for a NASA H2 car.

DANG I need those longer bolts that connect the benen tie bar to the ASR subframe brace. Ive had the gold benen tie bar sitting around for like a year bc I have yet to take those bolts off and figure out what size I need. any idea???

i think the thread pitch is 10x.25 or something i know its 10x something and its 110mm in length, i got my bolt from ACE hardware grade 8, you want to look for a grade 10 if possible for those suspension components.

 

[HawaiiImport]

i think the thread pitch is 10x.25 or something i know its 10x something and its 110mm in length, i got my bolt from ACE hardware grade 8, you want to look for a grade 10 if possible for those suspension components.

that was a big help!! thank you so much!

 

[Samurai_Blue]

that was a big help!! thank you so much!

dont trip chocolate chip