HALF USM / HALF JDM (56k..go get a drink)
- Thread starter konerri
- Start date
JDMsneakerz
dont believe the hype
man its coming along real good! love the paint..super dooper great job!!! nice slammed s2k too
89y49rexsi
New Member
it looks pretty good now but it will look sick when it is done good luck
JdMrican88
Prince of 2nd Generation
DAAAAAAAAAMN you WENT in on the body WORK LMAO! i feel u tho i didnt notice how long this damn thread was crazzy but yea Def Man Major Propz Comin Along real Nice....keep POSTEN EM
Integra36
Can't wait for my GSX!
I just read through all 30 pages of sexiness! This car is going to be seriously bad ass! Almost like what I want to do as well minus the engine. I can not believe after getting all th stuff you have bought, getting robbed from your brothers, then dropping 10k+ like it's nothing for an s2000 and then giving it away and buying a few other cars that your not bankrupt. You sir are a straight baller! Can't wait to see it completed!
~Dave
~Dave
Campanelli
OMG it has VTEC?
Nice I like the quick progress unlike me and my car
Ominous G2
┌∩┐(◣_◢)┌∩┐
Mad props for painting the entire car, inside and out. :thumbs up
GreenTeggy
My name is Ben
MEGA PROPS FOR PAINTING IT YOURSELF!! and getting rid of side molding and antenna! YOU WIN
House Special
I'll KICK YA FUCKIN AASS!
I must say I'm a tad disappointed.
sike
sike
404 Da Teg
Dre Da KID
update....?
konerri
New Member
U ask for an update???
Well here's an update. I'd some immediate family issues i had to attend too. So the integra was put on hold for over a week. Then finally started getting back into it. Found some imperfections, so had to sand down the paint a little on one side. Then found the right quarter panel had some waviness to it. So to re-bondo a little. Sorry no pics of the that but it took two nights of filling and sanding. It's is ready now for another shot of red. Speaking of red, i am down to about 1/8 of gal left. Got to go buy at least another 1/2 gal. The doors have like 20 dings in them each. That took one night a piece to do paint-less dent removal on. My side mirrors are all sanded down and ready for paint. My type R spoiler is sanded and also ready for paint. My trunk lid still needs some help. And so does the hood.
a lot of people keep telling me that the red is not as red as they think it should be. My camera is not doing good justice when i say that the car is very red. So here is a comparison.
my sister's somewhat old milano red.
here is my car.
both pictures were taken within minutes of each other.
I am going to be busy this weekend too so there won't be more progress on the teg until nest week. Next step would be to sand down both doors, truck lid(hatch), and the bumpers.
Speaking of bumpers, i am still trying to figure out exactly where tot put the EDM read fog light. I also cut out the fake ports on the rear bumpers above the fake diffuser. Anyone know the exact specs on where to put this light!!! Honda-tech doesn't this.
Well here's an update. I'd some immediate family issues i had to attend too. So the integra was put on hold for over a week. Then finally started getting back into it. Found some imperfections, so had to sand down the paint a little on one side. Then found the right quarter panel had some waviness to it. So to re-bondo a little. Sorry no pics of the that but it took two nights of filling and sanding. It's is ready now for another shot of red. Speaking of red, i am down to about 1/8 of gal left. Got to go buy at least another 1/2 gal. The doors have like 20 dings in them each. That took one night a piece to do paint-less dent removal on. My side mirrors are all sanded down and ready for paint. My type R spoiler is sanded and also ready for paint. My trunk lid still needs some help. And so does the hood.
a lot of people keep telling me that the red is not as red as they think it should be. My camera is not doing good justice when i say that the car is very red. So here is a comparison.
my sister's somewhat old milano red.
here is my car.
both pictures were taken within minutes of each other.
I am going to be busy this weekend too so there won't be more progress on the teg until nest week. Next step would be to sand down both doors, truck lid(hatch), and the bumpers.
Speaking of bumpers, i am still trying to figure out exactly where tot put the EDM read fog light. I also cut out the fake ports on the rear bumpers above the fake diffuser. Anyone know the exact specs on where to put this light!!! Honda-tech doesn't this.
Last edited:
DailyDB8
>>>Honda Enthusiast<<<
haha this guy, we're going for the same setup on the rear, any shots of the cut-outs? i can only picture seeing my comptech tie bar/sway when you look through it
i was told there is already suposed to be a outline on the rear bumper... i haven't checked yet to verify tho...
what i do know is that you have to cut your rear bumper support to fit the EDM rear fog light.
have you bought yours yet? i've only seen icbmotors with a complete one in stock. kinda pricey too.
btw that red is gonna be poppin with the black interior and rims.... gonna be sSwEEET! i can already picture it, haha
i was told there is already suposed to be a outline on the rear bumper... i haven't checked yet to verify tho...
what i do know is that you have to cut your rear bumper support to fit the EDM rear fog light.
have you bought yours yet? i've only seen icbmotors with a complete one in stock. kinda pricey too.
btw that red is gonna be poppin with the black interior and rims.... gonna be sSwEEET! i can already picture it, haha
konerri
New Member
I never knew they had a spot oulined on the bumper. Maybe it's on the inside of the bumper? Yeah, I've had the rear fog light for like year now. Along with a bunch of other stuff that was never installed.
And yes, this car will look good. Colors will play a big role in this build.
And yes, this car will look good. Colors will play a big role in this build.