euro bumper

[KeLs]

Were can i get a Euro Front bumper?

im talking about then ones with the fog lights kinda at an angle

thanks

 

[nautica_t]

you already have a euro bumper.. loook at the back of the front bumper, you'll see a faint dotted line to cut out of the front bumper to put fog lights in, the only question is finding the front fogs.
my set is coming in soon, however its brand new and its a pretty penny in the uk.

 

[heykosal]

lol I never knew that either.

 

[8urcivic]

does the oem itr lip have the cut out too?

 

[heykosal]

^^good question.

 

[ixcocoyxi]

if not, you could always cut the hole out on the bumper, put the lip on, and cut out what you need by following the hole on the bumper already.

 

[nautica_t]

i cannot confirm the oem itr lip, cause i haven't really looked, but the etch marking are on the front bumper. along as the rear.
when i get my new uk fogs i'll see how the template looks like.

 

[KeLs]

were did you buy your fogs?

 

[nautica_t]

a month ago

 

[KeLs]

like were what site?

 

[nautica_t]

any honda in uk.

 

[KeLs]

so i would have to call a honda dealer in uk to order?

 

[nautica_t]

that's correct or go to Cheswick Honda, they deliver international, that's where i got mine.

 

[KeLs]

you cant just get regular fogs and do it?

 

[nautica_t]

what do you mean by regular fogs?

if you're referring to part source type of fogs than probably yes.
but i'm an OEM person, i prefer things to fit up properly with little to no modifications.
such as wire harness, OE harness are usually far superior than aftermarket harnesses,
and with oe fogs. they bolt up properly with proper mounting brackets and hardware, and of course an oe fog switch and harness