new to the site..

[8urcivic]

I thought the arps only came in 3/8th inch. That would be like 9.5mm

no...arps are metric.......i just got mine....there 9mm......12k revs here i come!!!





im jk.

 

[Aussie]

no...arps are metric.......i just got mine....there 9mm......12k revs here i come!!!

.

Thats right, what am I thinking, All b-series vtec were 9mm everything else was 8mm. I was working out some other motors this morning that have the 3/8th bolts.

 

[8urcivic]

Thats right, what am I thinking, All b-series vtec were 9mm everything else was 8mm. I was working out some other motors this morning that have the 3/8th bolts.

edit....your right.

 

[Aussie]

no....there all 8mm......u can upgrade to 9mm.....but u have to get the rods drilled.

No the b16, b18c, and b18c5 are 9mm, and the after market rods like crowers and eagle use the 3/8th" bolt.

 

[8urcivic]

No the b16, b18c, and b18c5 are 9mm, and the after market rods like crowers and eagle use the 3/8th" bolt.

i started thinking and realized......your were right.....so i searched it to make sure.



all d series an ls/20s are 8mm

 

[GSratedR]

hey nice to meet you. i like your tuck it looks good on ur da! welcome.

 

[Aussie]

all d series an ls/20s are 8mm

correct

 

[8urcivic]

correct

wnded::cry:

 

[Aussie]

wnded::cry:

It's ok at least you don't argue like some people

 

[8urcivic]

It's ok at least you don't argue like some people

ill admit defeat.

 

[90datech]

well i see you all cleared that up.. the arp rod bolts were 8mm that i got.

 

[90datech]

Not a bad looking engine bay. I see some EK skirts.

yeah EK skirts and 95 accord front lip. yeah the engine bay is not finished yet.

i was bored so heres another pic. i used eg forks and eg 92-95 civic tein super street damper suspension. it rides so smooth. its not the best pic

 

[g3teg97]

Welcome to CI!

Nice DA.

 

[jdm xiong]

:welcome:

 

[allmotrdb7]

Welcome to CI !!!!!