Bike talk: Motorcycle/Scooter chat thread!
- Thread starter R13
- Start date
OneFastGSR
Member
there's not really a particular story it's happened multiple times :lol: Whenever I posted that the incident I was thinking of though, Basically where I live, The core parts of the towns/cities are where all the cops are, The back roads I drive on most the time are usually pretty empty of police so I just fly through them. I literally know all the backroads like the back of my hand, like every single road where they all lead what roads link other roads etc, Like no matter what road i'm on I have like multiple different ways to go and end up in different places. Driving around the area so much and knowing the roads is what makes it easy, So knowing that you can imagine how fast one can drive through a area like that. I can take every turn to the point my tires screech begin to lose traction (Basically the limit of the car as fast as I can go until I get better tires). But the incident I was thinking of.
Basically I was otw to a friends house, another friend was in the car with me at the time, I'm cruising through a backroad (Pulaski county) I'm cruising about 55 in a 35, I notice a black car in the distance was gaining on me and i'm already 20 over, So that guy's really speeding, I sped up to about 70 to see if he was still gaining or not. At that point he turned on the blue lights in the distance, he was obviously going to pull me over, So I just downshift and throw it in 3rd and get on it. Go through a couple turns and everytime I came out the turn I'd be way further ahead and he'd start gaining on the straights alittle bit. So I just started taking every road/turn I could, I went from pulaski county crossed into jacksonville, than took a twisty road that went through lonoke county back torwards pulaski county to a road directly parallel with the very beginning road. It's a long straight away so I was just cruising pretty fast watching my rear view to make sure noone showed up before I got over a big hill ahead, as I got to the top of the hill literally 2 cop cars flew past me going the opposite direction at the tip of the hill. (Forgot to mention the direction i'm going is directly to the police station, Both of them probably came from the station) I seen them tap their brakes as they passed but than I was over the hill and couldn't see them anymore. So I took a left onto the main street, Passed the police station, Watched rear view again to make sure they didn't turn onto main street before I took a turn, Took a left turn. Drove down a twisty/hilly road and went to a friends house on a street close. Parked in his back yard and that was that lol
Hold your take your car to the track and quit driving fast on the street comments because I'm not willing to drive my car 3+hours away to a track because if it broke at the track i'd be screwed. I have no way of towing it to the track either, Or anyone to goto the track with
Whenever I put a clutch/flywheel in the car (pressure plate is out so upgrade time) I'm going to put my brothers gopro on the car for whenever random s*** happens I can record it lol, I already put new tie rods, wheel bearings, brake pads, rotors, etc on. Now I got to replace 2 messed up motor mounts, clutch/flywheel, and a new set of tires cause mine are pretty worn most the turns if I hit at regular speed it will just start understeering and slide. Got started on the bike though this morning.
Old chain gone
Cleaned wheel and removed old rear sprocket install new
All the old chain grease burnt rubber whatever else that was clogged in the front sprocket, installed new front sprocket but no pic because it's to dark
This is how it sits right now. I'm waiting on my brother to come over so I can pick the rear of the bike up and he can move the stand forward so I can remove the extensions.
Got the left inside of swingarm alittle cleaner
But not the right lol
New vibrant timing belt tensioner came in for the integra
Basically I was otw to a friends house, another friend was in the car with me at the time, I'm cruising through a backroad (Pulaski county) I'm cruising about 55 in a 35, I notice a black car in the distance was gaining on me and i'm already 20 over, So that guy's really speeding, I sped up to about 70 to see if he was still gaining or not. At that point he turned on the blue lights in the distance, he was obviously going to pull me over, So I just downshift and throw it in 3rd and get on it. Go through a couple turns and everytime I came out the turn I'd be way further ahead and he'd start gaining on the straights alittle bit. So I just started taking every road/turn I could, I went from pulaski county crossed into jacksonville, than took a twisty road that went through lonoke county back torwards pulaski county to a road directly parallel with the very beginning road. It's a long straight away so I was just cruising pretty fast watching my rear view to make sure noone showed up before I got over a big hill ahead, as I got to the top of the hill literally 2 cop cars flew past me going the opposite direction at the tip of the hill. (Forgot to mention the direction i'm going is directly to the police station, Both of them probably came from the station) I seen them tap their brakes as they passed but than I was over the hill and couldn't see them anymore. So I took a left onto the main street, Passed the police station, Watched rear view again to make sure they didn't turn onto main street before I took a turn, Took a left turn. Drove down a twisty/hilly road and went to a friends house on a street close. Parked in his back yard and that was that lol
Hold your take your car to the track and quit driving fast on the street comments because I'm not willing to drive my car 3+hours away to a track because if it broke at the track i'd be screwed. I have no way of towing it to the track either, Or anyone to goto the track with
Whenever I put a clutch/flywheel in the car (pressure plate is out so upgrade time) I'm going to put my brothers gopro on the car for whenever random s*** happens I can record it lol, I already put new tie rods, wheel bearings, brake pads, rotors, etc on. Now I got to replace 2 messed up motor mounts, clutch/flywheel, and a new set of tires cause mine are pretty worn most the turns if I hit at regular speed it will just start understeering and slide. Got started on the bike though this morning.
Old chain gone
Cleaned wheel and removed old rear sprocket install new
All the old chain grease burnt rubber whatever else that was clogged in the front sprocket, installed new front sprocket but no pic because it's to dark
This is how it sits right now. I'm waiting on my brother to come over so I can pick the rear of the bike up and he can move the stand forward so I can remove the extensions.
Got the left inside of swingarm alittle cleaner
But not the right lol
New vibrant timing belt tensioner came in for the integra
Last edited:
OneFastGSR
Member
Also after purchasing the stator I have right below $2500 in the bike, After I order clutch/brake lever, and brake pedal off ebay, I'll have like $2523 or so in it last time I calculated
OneFastGSR
Member
R13 what's the best way to get this chain together? I don't have any chain tools to do the rivet on the master link... About to put all my parts and stuff together with the bike and leave though guess i'll have to finish it tomorrow, Gotta goto the lake and apparently we're going to camp lol. one of my friends is bringing these twin girls with him haha. I gotta get some alcy some swishers and go
Accel.speed
basically, i like fast!
Loved the story lol. I wish I knew someone whose backyard you can drive in! Hey that swing arm looks sexy. Unfortunately they get dirty as fuck super quickly .
Has anyone done any vinyl work?
. Has anyone done any vinyl work?
OneFastGSR
Member
Is it that easy? Thought it took alot of force to push the masterlink rivet together
OneFastGSR
Member
This is the masterlink it came with
R13
The other asshole
Oh those -____-
You have to have a tool for it
http://www.cyclegear.com/CycleGear/Accessories/Tools/Multi-Tools/brand/STOCKTON-TOOL-COMPANY/Chain-Breaker-and-Rivet-Tool-Kit/p/36518_00000
Might be able to find it cheaper idk
You have to have a tool for it
http://www.cyclegear.com/CycleGear/Accessories/Tools/Multi-Tools/brand/STOCKTON-TOOL-COMPANY/Chain-Breaker-and-Rivet-Tool-Kit/p/36518_00000
Might be able to find it cheaper idk
OneFastGSR
Member
Lol I'm going to try some pliers or c-clamp, I'll figure somethin out
94RS
No fucks given.
So as I'm on my way home from work, I'm stopped at a light and up comes one of those pre-customized ( :roll: ) Ruckus clones. Typical white dude trying to act like a black dude is on it with his girl on the back.
At this point I'm already laughing because it's a half-ass version of "custom" but I look closer at the frame and this douche seriously put a huge sticker he had made at the flea market that says "RUCKUS".... And looks nothing like an OEM Ruckus decal. Then I start shaking my head, he sees me and starts revving this POS at me :lol:
I obviously have no problem with a Chuckus... I own one. But to try to pass it off as a Honda and not even do any of the customization yourself? Get the f*** outta here...
At this point I'm already laughing because it's a half-ass version of "custom" but I look closer at the frame and this douche seriously put a huge sticker he had made at the flea market that says "RUCKUS".... And looks nothing like an OEM Ruckus decal. Then I start shaking my head, he sees me and starts revving this POS at me :lol:
I obviously have no problem with a Chuckus... I own one. But to try to pass it off as a Honda and not even do any of the customization yourself? Get the f*** outta here...