endo617: 98 Ej6 Project: Balanced Form
- Thread starter endo617
- Start date
JustinMcGee1
I like Hondas
They look great!
endo617
Rattle Can Technician
Thanks, just waiting for my new flywheel so I can replace my clutch, then ill put the OZ's on.
vtecteggy617
New Member
You stay getting good deals lol. Those are clean though
Sent from my Integra using Honda Motors!
Sent from my Integra using Honda Motors!
endo617
Rattle Can Technician
Yeah I'm always on the hunt.
Update: Findanza Flywheel 7.5 lb. came in today. Time to do work and install this Exedy OEM replacement clutch.
Sammich
Active Member
that's bossCraigslist steal of the day, $200 for OZ Superleggera 16x7 +37 with really good Kuhmo Ecsta 205/45/16. Can't wait to toss them on.
Aussie
Zoom-Zoom
That's an amazing deal on those wheels, but why no Exedy flywheel?
endo617
Rattle Can Technician
Hell yeah, it was an amazing deal. I went with the Fidanza because its easier to replace the insert than going to the machine shop. Plus 7.5 lb. Is pretty nice.
endo617
Rattle Can Technician
This was me last week Thursday, test fitting my wheels and taking out my transmission agian. Wheel center bore was right on, so no centering hubs needed.
Transmission was not so lucky, input shaft sheared off. Assuming defective or previously damaged. I was lucky to have an LS input shaft that is exactly the same as a GSR.
Here it is today with the OZ Superleggera's, New Fidanza Flywheel, OEM Exedy clutch and Fresh Honda MTF. Hope I can survive this winter trouble free
Transmission was not so lucky, input shaft sheared off. Assuming defective or previously damaged. I was lucky to have an LS input shaft that is exactly the same as a GSR.
Here it is today with the OZ Superleggera's, New Fidanza Flywheel, OEM Exedy clutch and Fresh Honda MTF. Hope I can survive this winter trouble free
Last edited:
vtecteggy617
New Member
Those wheels look prefect on that car! All you need is a paint job and it would stunning! Keep up the good work bro
Sent from my Integra using Honda Motors!
Sent from my Integra using Honda Motors!
endo617
Rattle Can Technician
Thanks man, working on the paint job as soon as it gets warmer.
Update on clutch. Grabs really nicely. Smooth engagement and easy acceleration with the new 7.5lb flywheel. Im really happy with the whole thing, still have 200 miles to officially break it in properly.
On to future plans, I'm going to get some 15x8 wheels for autocross/track. Torn between Enkei Compe, 949 6UL, or Buddy Club P1.
Last edited:
Ted's Owner
On to Integra number two!
Nice parts list!Bought a few parts, some for maintenance. Pillow mounts for my new coilovers, and gaskets because I'm replacing crappy Omni Power 70mm Throttle Body that sticks closed with a JDM H22 62mm.
vtecteggy617
New Member
Getting ready for the summer I see lol
Don't forget I work at advance so I could help you with parts if needed
Sent from my Integra using Honda Motors!
Don't forget I work at advance so I could help you with parts if needed
Sent from my Integra using Honda Motors!