what did you do to your car today?

Jmickle

New Member
XjoEnX said:
Very nice! I'm doing the same thing later down the line. I was debating between the gloss and flat/matte black. Locks like ill be going for the flat/matte. Thanks for the pics sir!
Click to expand...
Yea, I think flat black looks best on carpet.


Sent from my iPhone using Tapatalk - now Free
 

randomhobo

automagic user
Installed new headlamps and HID low beams (BIG freaking difference).
put on window vent visors (the stick on kind) and a rear hatch visor (I just like the way they look).
 

MrGurley

************5-0
changed my earl with all my new maddjdmvtak shit, then irritated my gf with a few 9k pulls otw to the gym
 

98GS

Member
Been to busy to look. I'm guessing I need to take out the side panels to find the tubes? Been searching all over and most the threads on it are so old the pictures don't work. I originally thought it was getting in through my broken antenna so I pulled it and caped the hole. Reduced the water by a lot but I still get a little bit. I need to check my tail gaskets too just to be sure.

Sent from my XT912 using Xparent Green Tapatalk 2
 

BeatBox

Real Good!
98GS said:
Been to busy to look. I'm guessing I need to take out the side panels to find the tubes? Been searching all over and most the threads on it are so old the pictures don't work. I originally thought it was getting in through my broken antenna so I pulled it and caped the hole. Reduced the water by a lot but I still get a little bit. I need to check my tail gaskets too just to be sure.

Sent from my XT912 using Xparent Green Tapatalk 2
Click to expand...
same problem here, its coming thru the tail light seal on mine
take the pastic panels off and check around the seal, should be wet is the water has been coming in thru there
 

Jmickle

New Member
98GS said:
Been to busy to look. I'm guessing I need to take out the side panels to find the tubes? Been searching all over and most the threads on it are so old the pictures don't work. I originally thought it was getting in through my broken antenna so I pulled it and caped the hole. Reduced the water by a lot but I still get a little bit. I need to check my tail gaskets too just to be sure.

Sent from my XT912 using Xparent Green Tapatalk 2
Click to expand...
Yea just take those panels off and reach up in there and you'll feel the tube, if it's unplugged just plug it back in and you'll be good to go.


Sent from my iPhone using Tapatalk - now Free
 

98GS

Member
Ill tear into it the next couple days then of the weather stays nice. I know how to take the panels out so should be easy

Sent from my XT912 using Xparent Green Tapatalk 2
 

Aussie

Zoom-Zoom
Oil changed
Rotated tires

Dissembled, cleaned, re-greased, and reassembled bpv.

New cabin filter (always a pita job)
 
Last edited:
You must log in or register to reply here.
Top