Rusted nuts on the cat.

Theasian

New Member
Cut and beat. Deal with it all the time. I spend bout 15 min max but if you want to go to a shop go for it
 

Aqualite_Solid

DB7 no Aston
I used pb blaster a jack handle ans slowly turned then.... if you force it the Studs WILL BREAK....

Sent from my toaster using Tapatalk2
 

Ominous G2

┌∩┐(◣_◢)┌∩┐
I'd actually expect them to snap. Then break out the torch.
 


Aqualite_Solid

DB7 no Aston
Its always a possibility that you will get some ass hat there that will break it....

Sent from my toaster using Tapatalk2
 

99TegLs

Senior Member
i cut them out in 5 minutes and used new bolts, Dremel does wonders
 


Ganyon

Active Member
I just went to midas to have them cut the bolts. 30 bucks and i was gone. A Dremel at my walmart would have been 40 bucks.
 

99tegjawn

New Member
Liquid wrench or on blaster and everyone thinks that stuff works in minutes. Spray it on twice a day for a week, then use a breaker bar and they will either break or come loose. Could have saved you 30 bucks but I'm with you on having the shop do it for just 30 lol.


Sent from my iPhone using Tapatalk
 

Ganyon

Active Member
Problem was that i had to get the exhaust on today. It's my only car and i could'wast ride around with no muffler. So it was easier to spend 30 bucks and have them do it in 5 minutes.
 

Aqualite_Solid

DB7 no Aston
True but I have freinds that sit around my damn house and play forza all day.... I just put those bastards to work lol

Sent from my toaster using Tapatalk2
 
You must log in or register to reply here.
Top