OGstackadoIIa
TEAM LlGHTSPEED RACING
Google it and you'll understand what I'm talking about
2 wire chip what wires do I connect
- Thread starter Jeff
- Start date
dc4_illinois
Local Troll
@Jeff
Take caution when using gimmicks like these. It is possible to damage your ECU or your vehicle's wiring.
Since your MAP sensor will be disconnected, your ECU cannot calculate how much air is being drawn into your engine.
You will also go through spark plugs and/or oxygen sensors more rapidly. Expect a decrease in fuel mileage, also.
No Air Calculation => No Air/Fuel Ratio Compensation/Correction => Loss In Power => More Wear On Parts
Just thought I'd let you know.
Take caution when using gimmicks like these. It is possible to damage your ECU or your vehicle's wiring.
Since your MAP sensor will be disconnected, your ECU cannot calculate how much air is being drawn into your engine.
You will also go through spark plugs and/or oxygen sensors more rapidly. Expect a decrease in fuel mileage, also.
No Air Calculation => No Air/Fuel Ratio Compensation/Correction => Loss In Power => More Wear On Parts
Just thought I'd let you know.
Jackmldog
Jack
False. Intelligence and the will not to be ignorant are more important than age. But OP (Original poster since you're a noob), OG is right. You need to get the second one. The first one is to plug each end of + and - battery terminals. Then the second one you hook up to each nut. Thus giving you a jolt that'll hopefully let you know you're retarded. Or fry your brains and make you think your going fast.
njhustler
New Member
I knew op was gonna get crap lol. If its what i think it is , those are those resistors that hook up to your iat sensor. It changes the voltage and fools the computer into thinking colder denser air is entering the engine. Thus advancing timing and fuel. Will he see gains. maybe. Could he damage engine from running rich , maybe. I guess time will tell. Be sure to update us when you do it. 1 last thing +1 for doing whatever the f you want with your car , just check back in with any updates good or bad.
OGstackadoIIa
TEAM LlGHTSPEED RACING
You're top notch, bud :roll:
OGstackadoIIa
TEAM LlGHTSPEED RACING
True, but more often than not, people are so dense that it takes years before they realize the error in their ways. Like that n00b that put those fucking nightrider LED strip on their front bumper :lol:
Jackmldog
Jack
Haha that stupid fuck. They added 10hp though
phinattic
New Member
Dude how many people dose it take to tell you that your wasting your time and money. That chip you bought is supposed to wire into your intake air temp sensor. All it is supposed to do is tell your computer that the air coming into your engine is cooler than it really is. It will not work there are no measurable increase in performance. It is just a way to part a fool from his money. Or should I say part you from your money. Wise up and listen to what your being told.
1994 Integra
New Member
Hey Dont say that
. Im 17 and am almost done with my b16 swap in my Crx. And plan on boosting to. I work in a delarship as a lube tech. In one of the best auto programs in the state. And have a national ford aaa competion next week. Please have hope in us. Just not this kid lol.Prozon
Kris
Okay okay, SOME of the younger generation has hope. :thumbs upHey Dont say that
1994 Integra
New Member
Much better
OGstackadoIIa
TEAM LlGHTSPEED RACING
hahaha!!
http://media.tumblr.com/tumblr_lvncgo4Qcn1r3zat8.gifyou guyz scared the kid away. we were all there once. half of the nerds that posted on this have 6-7 grand in tehre motors and only makin 170-180 whp whos the retard now.
Who the fuck in this thread has dumped that into their motors?! hahahahahahahahahaha. I'm on a stock c1, but I'm proven to make that shit work
So you're encouraging him to go ahead with this mod?