moving license plate

[bkirshr]

your blocking your intake from that side aint you?

Never thought about that, but I have a short ram intake and idk if that would block it too much

 

[TheSkygun]

Lol nice, I think I'll go with the kit and save myself the hell of making one xD

 

[bkirshr]

Lol nice, I think I'll go with the kit and save myself the hell of making one xD

haha yeah, I was bored at home one weekend. It actually worked out that there was a slot in the bumper at the top of the grill that the tab i made to screw into the bumper fit perfectly. haha

 

[TheSkygun]

Haha nice. I just don't think I have the patience for it, just redid my climate control and still have the same issue.

When I pulled my license plate off to hold it with zip ties I noticed it was bent. Is your license plate bent or was it straight

 

[bkirshr]

bent how? mines pretty straight.

 

[ixcocoyxi]

i got this from autozone $10-$15

and was able to do this

and this before i had fogs and the bra

i suggest painting it due to the fact that itll rust pretty easily tho

=always on my iphone=

 

[bkirshr]

i got this from autozone $10-$15

=always on my iphone=

thats nifty, is it holding your plate from the bottom?

 

[TheSkygun]

I like that idea a lot if you can adjust its angle, I have a purple spray paint I was gonna use on my calipers that I could use on that.

And from where the bolts hold it it has a bend to curve it inward

 

[TheSkygun]

i got this from autozone $10-$15

and was able to do this

and this before i had fogs and the bra

i suggest painting it due to the fact that itll rust pretty easily tho

=always on my iphone=

How does it hookup?

 

[Accel.speed]

16 bucks for 2 tiny peices of plastic is a rip off. Id just go to an acura dealership. They have to be cheaper than that!

 

[klutchDb7]

bent how? mines pretty straight.

Sig worthy :lol:

 

[XslickwhitetegX]

bent how? mines pretty straight.

LMFAO will be in my sig


I just bent my plate and but 3m clear taope on inside on lip(so it doesnt scratch my lip) and use good old zip ties to hold the plate on.

theres is a motion license plate that i would like to buy, called Show n Go but its pricy. but they two versions, one with actuator and one w/o.

http://www.altecproducts.com/

 

[TheSkygun]

Yeah I saw those but too pricey just to move it. I'm getting my bumper painted soon so I wannt to get the thing out of the way from scratching the bumper.

 

[TheSkygun]

And to the 3m tape with zipties. Knowing my luck it would fall off and id get pulled over

 

[XslickwhitetegX]

mine hasnt fallen off in a yr, just zip it tight and hid the zipties