DIY Auto shifter light

TheSkygun

New Member
So after changing all the interior lights to blue leds from KlutchDb7's DIY i took pics of how to get to and change the one for the auto shifter. I forgot what bulb it is but someone might know before i find out again. i don't have pictures of an led in the spot due to putting a boot over mine and a razo shifter.

KlutchDb7 DIY http://www.clubintegra.com/board/showthread.php?t=56586
place i bought my leds from http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=/mini-wedge.html

The bulb is a 168 So I'd go with the 74-xHP to keep it thin to fit.




As you know, there are two screws in the shift knob. gotta remove them both



The next step, remove the screws that hold done the whole thing


Now just have to pull the line out from its clipped spot so you can move the whole thing


Now once you pull the group up and flip it over all you have to do is turn the lightbulb as if it was on from your tails


And the little dot is the light


 
Last edited:

TheSkygun

New Member
Yeah, looks like your right. I'll update it with the bulb it is and the led to switch with


Edit: updated bulb
 
Last edited:

covert_Con

Senior Ricer
I never even noticed that light when I had my auto, lmao.

Good write up
 


Ganyon

Active Member
When I get my car back, I might take out one of my cluster lights and stick in there to see how it looks.
 

TheSkygun

New Member
Sounds good, I think the ones in the cluster might be too wide to fit
 


TheSkygun

New Member
the stock bulb is a 168 and i would change to the 74-xHP but ill do some double checking so that no one buys and find out its wrong. probably wednesday as im doing some errands ill call around to find out and will pull mine out again.
 
Top