Cluster swap in DA

In this thread i will show you how to take out your cluster and swap in a new one. Its very simple but some people are unsure when a cluster swap is brought up. I didnt do a swap in my integra but a lot of people were asking so i just did a mock swap. I had to take it apart because my speedometer wasnt working.

Remove about 5 screws on the intrument panel




Remove 2 on the top of the bezel


Remove the cover for the temperature settings and remove 3 screws


Remove the plugs behind the intrunment panel


So far it should look like this





Remove the plugs from the cluster


-Reverse the process to swap in new cluster.

Theres my problem...a snapped speedo cable

Nice write up! Been looking to do this to my car for awhile.

thanks alot!!! couldnt find the last screws holding it in till i found this write up. i couldnt find the ones behind the A/C control lol

how do you remove/reinstall the speedo cable?

no updated pics/info on removal of the speedo cable?

any updated versions?

Speedo cable removal

One note to add is the when I removed my cluster. The speedo cable was a bit short to allow me to get my hand behind and unclip it.

1992 integra

That's why it is best to unhook from the tranny first so you can get some slack.